Product structure: inflatable and exhausted in one, pay attention to the logo outside the interface; as the product is equipped with three different specifications of air nozzles, inflatable products that respond to different intake valves, are outdoor inflatable products, inflatable beds, inflatable toys and other inflatable products Good helper, built-in 4 D-type dry batteries for outdoor use. Fully charged can continuously inflate and exhaust the household air mattress for several times. Generally, you should stop and rest for about 10 to 15 minutes. Due to the application characteristics of the product, it can prevent the motor from overheating and causing damage.
Operation method:
1. The battery electric air pump has been prepared, and the inflatable product has been deployed and placed in a place where there is no sharp debris.
2. Determine the inflation nozzle with the appropriate interface and connect it to the inflation port. When pumping, connect it to the pumping port. There is an English logo, and you can distinguish it carefully. If you don't know, you can read the manual.
3. Press the start of the power source on the battery electric air pump, press the "-" logo switch to indicate the start of inflation, and press the "0" logo switch to stop the inflation.
4. Pay attention to the air-filling port and air-exhausting port of the inflatable product not to be blocked by debris, so as not to affect the operation of the battery electric air pump during inflation or air extraction.
5. After the battery is used up, charge it for 8 to 10 hours before using it again.