How to use a mattress electric pump
Some time ago, a Vietnamese customer said after receiving our electric pump, why our electric pump is slow and not fully charged.
Then the customer provided the specifications of the mattress and the pictures of the air nozzle. After I received the relevant information, I found that there was only one 8-point PE air nozzle on the mattress. Due to the large size of the mattress, if the PVC air nozzle is used, it is necessary to It is really difficult to fully fill a mattress. I personally took the JH-616 electric pump to make a comparison and explained that if I use an 8-point air nozzle, it will not meet the product requirements for 10 minutes of charging, but if I use a double-cover air nozzle or With a bowl-shaped screw valve, it only takes 45 seconds to fill a bed, and guests are advised to use our bowl-shaped valve instead.
In order to avoid similar problems, I would like to share my thoughts for your reference.
Air mattress, also known as air bed, portable air bed. When you want to use an air bed, just fill it up with the mattress pump and you're ready to go. There are currently two types of inflatable bed electric pumps: automatic and manual pumps. Automatic mattress pumps are further divided into battery pumps, dry battery pumps, or AC electric air pumps. Hand pumps are further divided into foot pumps or hand pumps.
Here is a brief description of how to inflate a mattress with an AC electric pump
1. Open the cover on the air nozzle of the inflatable bed;
2. Put the nozzle matching the air nozzle of the air bed on the air pump air port;
3. Insert the connector on the electric pump into the air nozzle of the inflatable bed;
4. Plug in the power supply of the electric pump, and pay attention to see the voltage suitable for the electric pump you bought.
5. Turn on the power switch on the electric pump, and then inflate the mattress.
6. Continue to inflate until the air bed is full, and it feels hard to touch with your hand.
7. After inflating the air, turn off the switch of the electric pump, pull out the electric pump, and quickly cover the air nozzle of the mattress.